Applicable Scenarios:
Clean Operating Area (for areas requiring frequent cleaning and sufficient lighting), Semi-clean Operating Area (for auxiliary production), and General Operating Area (for warehousing, office and other spaces).

Coating Thickness:

Core Features:
Uniform standards, consistent construction control and identical warranty terms for wall and floor materials prevent blame-shifting between different suppliers and fully meet all SC acceptance requirements in one go.

Key Technical Parameters:
All four zones adopt unified arc transition design with moisture-proof, seepage-resistant, mildew-proof and antibacterial properties; construction is carried out synchronously, and hazardous substances in all areas comply with national standards.

Applicable Scenarios:
Food, beverage, beer, laboratory, clean workshop, canteen, tobacco, packaging workshop, new energy, pharmaceutical packaging workshop

Coating Thickness: 1.5-2.5mm

Core Features:
High wear resistance, moderate load resistance, bio-based environmental protection, FDA food hygiene standards

Key Technical Parameters:
Compressive strength ≥ 60MPa, tensile strength ≥ 12MPa, wear resistance ≤ 13mg, resistance to 30% acid and alkali for 72 hours without abnormality, adhesion ≥ 3.8MPa

Applicable Scenarios:
Electronics, new energy, clean room, tobacco, pharmaceutical packaging, laboratory, office space, and conference hall (light load + high cleanliness)

Coating Thickness: 1-1.5mm

Core Features:
Bio-based materials: eco-friendly & low-carbon, low VOC, temperature-resistant, supports Pantone/GB color card customization

Key Technical Parameters:
Compressive strength ≥ 60MPa, tensile strength ≥ 12MPa, temperature resistance -40℃ to 130℃, wear resistance ≤ 15mg, adhesion ≥ 3.5MPa

Applicable Scenarios:
High-end commercial (luxury stores/restaurants/hotels/exhibition halls), office (headquarters/creative parks/tech companies), residential (apartments/villas/boutique hotels) and special spaces (laboratories/hospitals/museums/garages)

Coating Thickness: 1-3mm

Core Features:
4C quaternary synergy (bio-based resin plus cement aggregate), compressive strength greater than or equal to 65 MPa, -40 degrees C to 120 degrees C temperature resistance, seamless monolithic, Red Dot UFLOOR 16 color card, FDA food-grade eco-friendly, near-zero VOC, stain-resistant and antibacterial

Key Technical Parameters:
Compressive strength greater than or equal to 65 MPa, -40 degrees C to 120 degrees C temperature resistance, adjustable gloss 10-35 degrees, surface dry less than or equal to 8h, ready for use in 48h, service life greater than or equal to 20 years, near-zero VOC, FDA food-grade, seamless, stain-resistant and antibacterial

Applicable Scenarios:
Central kitchen, dairy workshop, cold storage (0℃ to -40℃), meat processing, new energy, pharmaceutical packaging workshop

Coating Thickness: 4-6mm

Core Features:
Resistant to -40℃ freeze-thaw cycles and 120℃ steam cleaning, FDA certified, addressing the issues of "low-temperature brittleness and high-temperature softening" in traditional epoxy

Key Technical Parameters:
Compressive strength ≥ 60MPa, tensile strength ≥ 10MPa, wear resistance ≤ 15mg, anti-slip coefficient ≥ 0.6 (R10 grade), surface dryness ≤ 6h / full dryness ≤ 24h

Applicable Scenarios:
Hospitals (ward, ICU, corridor), schools/kindergartens, nursing homes for the elderly (high-density + hygiene-sensitive scenarios)

Coating Thickness: 1.5-2.5mm

Core Features:
Antibacterial rate ≥99% (Escherichia coli, etc.), flexible and cushioning, sound insulation and noise reduction, stain retention rate ≤1%, easy to wipe

Key Technical Parameters:
Compressive strength ≥ 60MPa, tensile strength ≥ 18MPa, resistance to 20% acid and alkali for 48 hours without abnormality, adhesion ≥ 3.5MPa, FDA/EU dual certification