Applicable Scenarios:
Commercial complexes, office building corridors, ordinary industrial workshops, school classrooms, hospital hallways, underground garages (non-heavy load)

Coating Thickness: 2-3mm

Core Features:
The seamless, smooth, and easy-to-clean matte/high-gloss coating, suitable for various base layers, is a cost-effective flooring solution for commercial and general industrial spaces

Key Technical Parameters:
Compressive strength ≥ 60MPa, tensile strength ≥ 12MPa, wear resistance ≤ 35mg, leveling property ≥ 200mm, surface dryness ≤ 4h / full dryness ≤ 24h

Applicable Scenarios:
Residential decoration, commercial space, public facilities, coloring decoration of wooden/metal/plastic substrates

Coating Thickness: Single-layer thin coating (total thickness ≤ 0.5mm)

Core Features:
Even tinting, strong hiding power, good lightfastness, and support for Pantone/GB color card customization

Key Technical Parameters:
Pencil hardness 4H, Taber abrasion loss ≤10mg, color fastness to rubbing ≥Grade 4, VOC compliant with GB 18581-2020

Applicable Scenarios:
Floor protective layer (cement / epoxy / polyurethane), protection for wooden / metal / plastic substrates (transparent and wear-resistant)

Coating Thickness: Single-layer thin coating (total thickness ≤ 0.5mm)

Core Features:
High scratch resistance, transparent without yellowing, resistant to acid and alkali organic solvents, scrub resistance ≥10,000 times

Key Technical Parameters:
VOC≤50g/L, adhesion≤level 1 (cross-cut method), no abnormalities after 48 hours of water resistance, no changes after 24 hours of 10% acid and alkali resistance

Applicable Scenarios:
Suitable for high-grade workshops such as infant formula, health food, aseptic filling, and prepared food; intensive disinfection zones (hydrogen peroxide/peracetic acid); food plant visitor corridors and brand display areas; 10-year maintenance-free high-end cleanroom facilities

Coating Thickness: Single thin coat 0.03-0.05 mm

Core Features:
Polyurethane anti-mold and antibacterial coating (1 primer plus 2 topcoats plus sealant), Level 0 mold resistance, antibacterial rate greater than or equal to 99 percent, scrub resistance greater than or equal to 10,000 cycles, resistant to hydrogen peroxide/peracetic acid, yellowing resistance Delt

Key Technical Parameters:
Level 0 mold resistance, antibacterial rate greater than or equal to 99 percent, scrub resistance greater than or equal to 10,000 cycles, adhesion less than or equal to Grade 1, disinfectant resistance 72h, yellowing resistance Delta-E less than or equal to 2 (1000h), VOC/heavy metals comply with national standards

Applicable Scenarios:
Suitable for high-temperature and explosion-risk areas in food plants under strict fire control (including workshops, corridors, pump rooms, and storage), also suitable for crowded places such as shopping malls, hospitals, and schools

Coating Thickness: Single thin coat 0.06-0.08 mm

Core Features:
A1 Grade non-combustible plus Level 0 mold resistance, dual highest ratings; inorganic water-based system (1 primer plus 2 topcoats plus sealant), scrub resistance greater than or equal to 3,000 cycles, low VOC, anti-chalking, humidity regulating, suitable for strict fire control and high-temperatur

Key Technical Parameters:
A1 Grade non-combustible, Level 0 mold resistance, scrub resistance greater than or equal to 3,000 cycles, alkali resistance 24h, VOC/formaldehyde/heavy metals comply with GB 18582-2020 limits

Applicable Scenarios:
Suitable for production workshops of bakery, dairy, beverage, candy, etc.; auxiliary areas such as raw material staging, packaging material disinfection, finished product turnover, laboratories and clean corridors; as well as outer packaging workshops, finished product warehouses, and office clean z

Coating Thickness: Single thin coat 0.035-0.08 mm

Core Features:
Positioned as a cost-effective high-volume product, composed of water-based epoxy primer (1 coat), anti-mold topcoat (2 coats), and food-grade sealant; water-based low VOC, meeting routine cleanliness and hygiene requirements

Key Technical Parameters:
Level 0 mold resistance, scrub resistance greater than or equal to 10,000 cycles, adhesion less than or equal to Grade 1, alkali resistance 24h, VOC/formaldehyde/heavy metals comply with GB 18582-2020 limits