Applicable Scenarios:
Electronic clean room, semiconductor factory, data center, precision instrument workshop, chemical explosion-proof area, operating room

Coating Thickness: 2-3mm

Core Features:
Electrostatic dissipation type, surface resistance 10⁶-10⁹Ω, environmentally friendly and odorless, suitable for precision electronics / explosion-proof scenarios

Key Technical Parameters:
Compressive strength ≥ 45MPa, tensile strength ≥ 10MPa, system grounding resistance ≤ 10Ω, no abnormalities after exposure to 20% acid and alkali for 60 hours

Applicable Scenarios:
Shopping mall showrooms, hotel lobbies, high-end office buildings, brand boutiques, hospital lobbies, high-end residences

Coating Thickness: 2-3mm

Core Features:
Customized with a stone-like texture, it boasts strong decorative appeal, excellent wear resistance and scratch resistance, and is available in matte or semi-gloss finishes

Key Technical Parameters:
Compressive strength ≥ 45MPa, tensile strength ≥ 12MPa, resistance to 20% acid and alkali for 60 hours without abnormality, adhesion ≥ 3.2MPa

Applicable Scenarios:
Commercial complexes, office building corridors, ordinary industrial workshops, school classrooms, hospital hallways, underground garages (non-heavy load)

Coating Thickness: 2-3mm

Core Features:
The seamless, smooth, and easy-to-clean matte/high-gloss coating, suitable for various base layers, is a cost-effective flooring solution for commercial and general industrial spaces

Key Technical Parameters:
Compressive strength ≥ 60MPa, tensile strength ≥ 12MPa, wear resistance ≤ 35mg, leveling property ≥ 200mm, surface dryness ≤ 4h / full dryness ≤ 24h

Applicable Scenarios:
Residential decoration, commercial space, public facilities, coloring decoration of wooden/metal/plastic substrates

Coating Thickness: Single-layer thin coating (total thickness ≤ 0.5mm)

Core Features:
Even tinting, strong hiding power, good lightfastness, and support for Pantone/GB color card customization

Key Technical Parameters:
Pencil hardness 4H, Taber abrasion loss ≤10mg, color fastness to rubbing ≥Grade 4, VOC compliant with GB 18581-2020

Applicable Scenarios:
Floor protective layer (cement / epoxy / polyurethane), protection for wooden / metal / plastic substrates (transparent and wear-resistant)

Coating Thickness: Single-layer thin coating (total thickness ≤ 0.5mm)

Core Features:
High scratch resistance, transparent without yellowing, resistant to acid and alkali organic solvents, scrub resistance ≥10,000 times

Key Technical Parameters:
VOC≤50g/L, adhesion≤level 1 (cross-cut method), no abnormalities after 48 hours of water resistance, no changes after 24 hours of 10% acid and alkali resistance

Applicable Scenarios:
Suitable for high-grade workshops such as infant formula, health food, aseptic filling, and prepared food; intensive disinfection zones (hydrogen peroxide/peracetic acid); food plant visitor corridors and brand display areas; 10-year maintenance-free high-end cleanroom facilities

Coating Thickness: Single thin coat 0.03-0.05 mm

Core Features:
Polyurethane anti-mold and antibacterial coating (1 primer plus 2 topcoats plus sealant), Level 0 mold resistance, antibacterial rate greater than or equal to 99 percent, scrub resistance greater than or equal to 10,000 cycles, resistant to hydrogen peroxide/peracetic acid, yellowing resistance Delt

Key Technical Parameters:
Level 0 mold resistance, antibacterial rate greater than or equal to 99 percent, scrub resistance greater than or equal to 10,000 cycles, adhesion less than or equal to Grade 1, disinfectant resistance 72h, yellowing resistance Delta-E less than or equal to 2 (1000h), VOC/heavy metals comply with national standards