Applicable Scenarios:
Specifically designed for renovation projects, suitable for priming pretreatment on dense and smooth substrates such as ceramic tiles, old painted surfaces, metal, wood veneers, rigid PVC, and glass. Widely used in wall and floor renovation of old workshops.

Coating Thickness: Single thin coat 0.02-0.03mm

Core Features:
Features dual adhesion technology of silane bonding and penetration anchoring, universal substrate compatibility and strong system compatibility. Effectively seals substrate pores, prevents alkali efflorescence and color bleeding, water-based with low VOC, stable film.

Key Technical Parameters:
Adhesion on sanded tiles reaches Class 0; adhesion on old painted surfaces ≤ Class 1; fast drying at 25°C; VOC content ≤ 80 g/L; controllable application rate; suitable for roller, brush, and airless spray application — tailored for standardized renovation construction.

Applicable Scenarios:
Meat slaughtering workshop, seafood processing workshop, dairy workshop, cold storage, heavy chemical plant, high temperature and high humidity environment

Coating Thickness: 6-12mm

Core Features:
Resistant to steam cleaning at 150℃, it can be reinforced with 10% emery to enhance its strength. With a slip resistance coefficient of R11, it is suitable for AGV channels

Key Technical Parameters:
Compressive strength ≥ 60MPa, tensile strength ≥ 15MPa, temperature resistance -40℃ to 130℃, anti-slip coefficient ≥ 0.7, surface dryness ≤ 7h / full dryness ≤ 30h

Applicable Scenarios:
Clean Operating Area (for areas requiring frequent cleaning and sufficient lighting), Semi-clean Operating Area (for auxiliary production), and General Operating Area (for warehousing, office and other spaces).

Coating Thickness:

Core Features:
Uniform standards, consistent construction control and identical warranty terms for wall and floor materials prevent blame-shifting between different suppliers and fully meet all SC acceptance requirements in one go.

Key Technical Parameters:
All four zones adopt unified arc transition design with moisture-proof, seepage-resistant, mildew-proof and antibacterial properties; construction is carried out synchronously, and hazardous substances in all areas comply with national standards.

Applicable Scenarios:
Food, beverage, beer, laboratory, clean workshop, canteen, tobacco, packaging workshop, new energy, pharmaceutical packaging workshop

Coating Thickness: 1.5-2.5mm

Core Features:
High wear resistance, moderate load resistance, bio-based environmental protection, FDA food hygiene standards

Key Technical Parameters:
Compressive strength ≥ 60MPa, tensile strength ≥ 12MPa, wear resistance ≤ 13mg, resistance to 30% acid and alkali for 72 hours without abnormality, adhesion ≥ 3.8MPa

Applicable Scenarios:
High-end commercial (luxury stores/restaurants/hotels/exhibition halls), office (headquarters/creative parks/tech companies), residential (apartments/villas/boutique hotels) and special spaces (laboratories/hospitals/museums/garages)

Coating Thickness: 1-3mm

Core Features:
4C quaternary synergy (bio-based resin plus cement aggregate), compressive strength greater than or equal to 65 MPa, -40 degrees C to 120 degrees C temperature resistance, seamless monolithic, Red Dot UFLOOR 16 color card, FDA food-grade eco-friendly, near-zero VOC, stain-resistant and antibacterial

Key Technical Parameters:
Compressive strength greater than or equal to 65 MPa, -40 degrees C to 120 degrees C temperature resistance, adjustable gloss 10-35 degrees, surface dry less than or equal to 8h, ready for use in 48h, service life greater than or equal to 20 years, near-zero VOC, FDA food-grade, seamless, stain-resistant and antibacterial

Applicable Scenarios:
Electronics, new energy, clean room, tobacco, pharmaceutical packaging, laboratory, office space, and conference hall (light load + high cleanliness)

Coating Thickness: 1-1.5mm

Core Features:
Bio-based materials: eco-friendly & low-carbon, low VOC, temperature-resistant, supports Pantone/GB color card customization

Key Technical Parameters:
Compressive strength ≥ 60MPa, tensile strength ≥ 12MPa, temperature resistance -40℃ to 130℃, wear resistance ≤ 15mg, adhesion ≥ 3.5MPa