| Model |
Photo |
Applicable scenarios |
Coating thickness |
Core features |
Key technical parameters |
| CPU M100 (General Purpose Type) |
 |
Central kitchen, dairy workshop, cold storage (0℃ to -40℃), meat processing, new energy, pharmaceutical packaging workshop |
4-6mm |
Resistant to -40℃ freeze-thaw cycles and 120℃ steam cleaning, FDA certified, addressing the issues of "low-temperature brittleness and high-temperature softening" in traditional epoxy |
Compressive strength ≥ 60MPa, tensile strength ≥ 10MPa, wear resistance ≤ 15mg, anti-slip coefficient ≥ 0.6 (R10 grade), surface dryness ≤ 6h / full dryness ≤ 24h |
| CPU M200 (Thin-Type) |
 |
Electronics, new energy, clean room, tobacco, pharmaceutical packaging, laboratory, office space, and conference hall (light load + high cleanliness) |
1-1.5mm |
Bio-based materials: eco-friendly & low-carbon, low VOC, temperature-resistant, supports Pantone/GB color card customization |
Compressive strength ≥ 60MPa, tensile strength ≥ 12MPa, temperature resistance -40℃ to 130℃, wear resistance ≤ 15mg, adhesion ≥ 3.5MPa |
| CPU M300 (Wear-Resistant Type) |
 |
Food, beverage, beer, laboratory, clean workshop, canteen, tobacco, packaging workshop, new energy, pharmaceutical packaging workshop |
1.5-2.5mm |
High wear resistance, moderate load resistance, bio-based environmental protection, FDA food hygiene standards |
Compressive strength ≥ 60MPa, tensile strength ≥ 12MPa, wear resistance ≤ 13mg, resistance to 30% acid and alkali for 72 hours without abnormality, adhesion ≥ 3.8MPa |
| CPU M400 (Heavy-Duty & Anti-Slip Type) |
 |
Meat slaughtering workshop, seafood processing workshop, dairy workshop, cold storage, heavy chemical plant, high temperature and high humidity environment |
6-12mm |
Resistant to steam cleaning at 150℃, it can be reinforced with 10% emery to enhance its strength. With a slip resistance coefficient of R11, it is suitable for AGV channels |
Compressive strength ≥ 60MPa, tensile strength ≥ 15MPa, temperature resistance -40℃ to 130℃, anti-slip coefficient ≥ 0.7, surface dryness ≤ 7h / full dryness ≤ 30h |
| SPU F100 (General Purpose Grade) |
 |
Manufacturing purification workshops, laboratories, chemical and pharmaceutical workshops, warehouse passageways, hospital corridors, garages |
1.5-2.5mm |
Seamless integration, easy to clean and maintain, elastic to bridge fine cracks, wear-resistant, suitable for medium to heavy loads |
Compressive strength ≥ 60MPa, tensile strength ≥ 18MPa, wear resistance ≤ 20mg, temperature resistance -30℃ to 80℃, dustproof level ≥ Level 6 |
| SPU F200 (Hygienic Grade) |
 |
Hospitals (ward, ICU, corridor), schools/kindergartens, nursing homes for the elderly (high-density + hygiene-sensitive scenarios) |
1.5-2.5mm |
Antibacterial rate ≥99% (Escherichia coli, etc.), flexible and cushioning, sound insulation and noise reduction, stain retention rate ≤1%, easy to wipe |
Compressive strength ≥ 60MPa, tensile strength ≥ 18MPa, resistance to 20% acid and alkali for 48 hours without abnormality, adhesion ≥ 3.5MPa, FDA/EU dual certification |
| MicroRock MicroStone |
 |
High-end commercial (luxury stores/restaurants/hotels/exhibition halls), office (headquarters/creative parks/tech companies), residential (apartments/villas/boutique hotels) and special spaces (laboratories/hospitals/museums/garages) |
1-3mm |
4C quaternary synergy (bio-based resin plus cement aggregate), compressive strength greater than or equal to 65 MPa, -40 degrees C to 120 degrees C temperature resistance, seamless monolithic, Red Dot UFLOOR 16 color card, FDA food-grade eco-friendly, near-zero VOC, stain-resistant and antibacterial |
Compressive strength greater than or equal to 65 MPa, -40 degrees C to 120 degrees C temperature resistance, adjustable gloss 10-35 degrees, surface dry less than or equal to 8h, ready for use in 48h, service life greater than or equal to 20 years, near-zero VOC, FDA food-grade, seamless, stain-resistant and antibacterial |
| WEP-G100 (General-Purpose Grade) |
 |
Commercial complexes, office building corridors, ordinary industrial workshops, school classrooms, hospital hallways, underground garages (non-heavy load) |
2-3mm |
The seamless, smooth, and easy-to-clean matte/high-gloss coating, suitable for various base layers, is a cost-effective flooring solution for commercial and general industrial spaces |
Compressive strength ≥ 60MPa, tensile strength ≥ 12MPa, wear resistance ≤ 35mg, leveling property ≥ 200mm, surface dryness ≤ 4h / full dryness ≤ 24h |
| WEP-C200 (Epoxy Colored Sand) |
 |
Shopping mall showrooms, hotel lobbies, high-end office buildings, brand boutiques, hospital lobbies, high-end residences |
2-3mm |
Customized with a stone-like texture, it boasts strong decorative appeal, excellent wear resistance and scratch resistance, and is available in matte or semi-gloss finishes |
Compressive strength ≥ 45MPa, tensile strength ≥ 12MPa, resistance to 20% acid and alkali for 60 hours without abnormality, adhesion ≥ 3.2MPa |
| WEP-ES300 (Anti-static Grade) |
 |
Electronic clean room, semiconductor factory, data center, precision instrument workshop, chemical explosion-proof area, operating room |
2-3mm |
Electrostatic dissipation type, surface resistance 10⁶-10⁹Ω, environmentally friendly and odorless, suitable for precision electronics / explosion-proof scenarios |
Compressive strength ≥ 45MPa, tensile strength ≥ 10MPa, system grounding resistance ≤ 10Ω, no abnormalities after exposure to 20% acid and alkali for 60 hours |
| WEP-T400 (Epoxy Terrazzo) |
 |
Airports, high-speed rail stations, subways, schools, shopping malls, art exhibition halls, office spaces, and mansions (with high pedestrian volume and high demand for decoration) |
4-8mm |
Replacing traditional terrazzo, it boasts a strong artistic appeal, offers a wide range of aggregate options, is wear-resistant and durable, and boasts a glossiness of 30-45° |
Compressive strength ≥ 60MPa, tensile strength ≥ 12MPa, wear resistance ≤ 18mg, temperature resistance -20℃ to 60℃, anti-slip coefficient ≥ 0.6 (R10 grade) |
| WPU-800 (Wear-resistant Clear Varnish) |
 |
Floor protective layer (cement / epoxy / polyurethane), protection for wooden / metal / plastic substrates (transparent and wear-resistant) |
Single-layer thin coating (total thickness ≤ 0.5mm) |
High scratch resistance, transparent without yellowing, resistant to acid and alkali organic solvents, scrub resistance ≥10,000 times |
VOC≤50g/L, adhesion≤level 1 (cross-cut method), no abnormalities after 48 hours of water resistance, no changes after 24 hours of 10% acid and alkali resistance |
| WPU-810 (Waterborne Colored Paint) |
 |
Residential decoration, commercial space, public facilities, coloring decoration of wooden/metal/plastic substrates |
Single-layer thin coating (total thickness ≤ 0.5mm) |
Even tinting, strong hiding power, good lightfastness, and support for Pantone/GB color card customization |
Pencil hardness 4H, Taber abrasion loss ≤10mg, color fastness to rubbing ≥Grade 4, VOC compliant with GB 18581-2020 |
cn