| Model |
Photo |
Applicable scenarios |
Coating thickness |
Core features |
Key technical parameters |
| CPU M100 (General Purpose Type) |
 |
Central kitchen, dairy workshop, cold storage (0℃ to -40℃), meat processing, new energy, pharmaceutical packaging workshop |
4-6mm |
Resistant to -40℃ freeze-thaw cycles and 120℃ steam cleaning, FDA certified, addressing the issues of "low-temperature brittleness and high-temperature softening" in traditional epoxy |
Compressive strength ≥ 60MPa, tensile strength ≥ 10MPa, wear resistance ≤ 15mg, anti-slip coefficient ≥ 0.6 (R10 grade), surface dryness ≤ 6h / full dryness ≤ 24h |
| CPU M200 (Thin-Type) |
 |
Electronics, new energy, clean room, tobacco, pharmaceutical packaging, laboratory, office space, and conference hall (light load + high cleanliness) |
1-1.5mm |
Bio-based materials: eco-friendly & low-carbon, low VOC, temperature-resistant, supports Pantone/GB color card customization |
Compressive strength ≥ 60MPa, tensile strength ≥ 12MPa, temperature resistance -40℃ to 130℃, wear resistance ≤ 15mg, adhesion ≥ 3.5MPa |
| CPU M300 (Wear-Resistant Type) |
 |
Food, beverage, beer, laboratory, clean workshop, canteen, tobacco, packaging workshop, new energy, pharmaceutical packaging workshop |
1.5-2.5mm |
High wear resistance, moderate load resistance, bio-based environmental protection, FDA food hygiene standards |
Compressive strength ≥ 60MPa, tensile strength ≥ 12MPa, wear resistance ≤ 13mg, resistance to 30% acid and alkali for 72 hours without abnormality, adhesion ≥ 3.8MPa |
| CPU M400 (Heavy-Duty & Anti-Slip Type) |
 |
Meat slaughtering workshop, seafood processing workshop, dairy workshop, cold storage, heavy chemical plant, high temperature and high humidity environment |
6-12mm |
Resistant to steam cleaning at 150℃, it can be reinforced with 10% emery to enhance its strength. With a slip resistance coefficient of R11, it is suitable for AGV channels |
Compressive strength ≥ 60MPa, tensile strength ≥ 15MPa, temperature resistance -40℃ to 130℃, anti-slip coefficient ≥ 0.7, surface dryness ≤ 7h / full dryness ≤ 30h |
cn